Cortizo lift and slide door repair

Cortizo 4600 lift & slide doors carry very large, heavy glass panels. Turning the handle lifts the sash onto its bogies so it glides, and lowering it compresses the gaskets for a weathertight seal. When the door becomes hard to move, leaks or won't lock, a worn part is usually to blame.

Common problems

  • Hard to slide or noisy: worn or damaged bogies, or debris in the track.
  • Handle won't lift the sash: a fault in the gear mechanism.
  • Draughts or leaks: worn or shrunk gaskets and brush seals.
  • Won't lock: misaligned keeps, or a sash that has dropped.

Parts you can replace

  • Bogie (carriage) sets for different sash weights
  • Lift & slide gears and handles
  • Keeps and locking components
  • Gaskets and brush seals

Before you start

Lift & slide sashes can weigh well over 100 kg. Lifting the sash out to change bogies is a job for an experienced installer with the right equipment. Cleaning the track and replacing gaskets or handles is often straightforward.

Shop 4600 Lift & Slide parts, or send us a photo and we'll identify what you need.

Frequently asked questions

My lift and slide door is hard to open – what is wrong?

Worn bogies (carriages), a damaged track or a faulty gear mechanism are the usual causes on Cortizo 4600 lift and slide doors.

Can lift and slide parts be replaced?

Yes. Bogie sets, gears, handles, keeps and gaskets are available as genuine Cortizo parts.

Should I fit lift and slide parts myself?

Lift and slide sashes are very heavy. Lifting the sash out to change the bogies should be done by an experienced installer.